Heavy Duty I-Beam Base Construction • 3/16" Skins
on Inner & Outer Core • 3"x2" Boxed Channeled
Ribs • 45° Spring Loaded Side Doors for Assisted Close
• Safety Chain End Doors With Ground "0" Let-down
Capability • End Door Lifting Loops • 3 Inlets, 1
Outlet Hole Former (Seal Mandrels if Desired) • Recessed
Platform Lid Form • Forklift Accessible • L-Channel
Framing for Versatility to Interchange Optional Lid Thickness
• Two Access Pans Round or Round Step or Conventional Square
or Reversed Taper Hole Former for Extension Risers with Secondary
Security Lid Applications • New Large Close/Opening Lever
System, Top or Side Mount
Standard
on Two-Piece Forms:
1,500
Gallon & Smaller
Two
Access Pans Round or Round Step or Conventional Square or Reversed
Taper Hole Former for Extension Risers with Secondary Security
Lid Applications • 3 Inlet Pipe Ports • 1 Outlet Pipe
Port (Seal Mandrels if Desired), Heavy Duty 1/2" Base Construction
• End Door Angle Iron Overlap • End Door & Side
Door Corner Braces • 2"x1" Channel Iron Ribs,
Extra on the Side Doors Where they Meet End Doors • 5/8"
Tie Bars, Wide Bends on Breaks for Extra Strength • Top
& Bottom "V" Groove Formers • Conventional
Cam Rod Close Assembly •
OTHER
OPTIONS AVAILABLE:
H-20 Bridge
Load Engineering
•
Monolithically Poured Baffle Walls •
Baffle Wall Blockouts for Single Compartment Tanks •
45° Side Doors •
Spring Loaded Side Doors for Assisted Close • Heavy Duty
3/16" Outer Cores •Heavy Duty 3/16" Inter Cores
• Large Close/OpeningLever System • Single End monolithically
Poured Tees • End Wall Baffle Tees (services all 3 inlet
ports) •
Delivery
Truck Rigs / Set Beds
